* Z-shaped diaphragm belt; The active unwinding control of the diaphragm ensures appropriate tension during the lamination
process, ensuring minimal deformation of the diaphragm during extension;
* Manual loading, automatic positioning, and cyclic stacking of polar plates and diaphragms (plate type);
* The lamination is completed, and the battery cells can be manually removed using a fixture, and adhesive can be directly
applied to the fixture;
* Equipped with a built-in vacuum generator as standard, it can also be connected to a factory vacuum externally;
* Within the thickness range of the local lamination, the number of laminations can be freely set;
* Three station design, can be applied to the stacking process of liquid battery and solid-state battery electrodes, and the
stacking program can be flexibly switched;
* Adopting compatibility design, the battery size can be adjusted by customizing some molds and adjusting the pressure claw,
with a large adjustment range;
* PLC control, HMI operation, easy to use and maintain;
* Can be used in a glove box

Specification

Air source	0.5-0.8MPa compressed air
electrode width	40-90mm
electrode length	40-100mm
Stacking thickness	≤ 15mm

* Single phase AC220V ± 10% (customizable AC110V), frequency 50/60Hz, power 400W;
* Air source: 0.5-0.8MPa compressed air;
* Vacuum source: The vacuum degree is better than -60Kpa (measured at standard atmospheric pressure, equipped with a built-in
vacuum pump as standard, or an external vacuum pump can be customized).
* Stacking method: Z-shaped stacking (liquid battery, membrane in roll type); Solid state stack (solid-state battery, with a
diaphragm in the form of a chip).
* Operation method: manual feeding, automatic picking and stacking of materials, manual fixture for taking and pasting of
battery cells;
* Stacking rhythm: 2-3S/piece for stacked electrodes, 4-6 S/piece for stacked metallic lithium (excluding the stacking
preparation time for each cell);
* Stacking accuracy: Liquid battery: ≤ ± 0.3mm (relative position size between electrodes);
Solid state battery: ≤ ± 0.5mm (relative position size between electrodes);
* electrode width: 40-90mm;
* electrode length: 40-100mm (in the direction of the electrode ear, excluding the size of the electrode ear);
* Standard mold: Liquid state battery (solid-state battery): Design the fixture according to the size of the battery electrode
provided by the customer.
* Stacking thickness: ≤ 15mm; The number of stacked layers can be set based on the thickness of the electrode (within the range
of local stacked thickness);
* electrode ear length: 0-25mm;
* Equipment size: L790 * W740 * H730mm (subject to actual design);
* Weight: approximately 200Kg;
* Electrical part
* PLC Xinjie/Omron
* PLC expansion module Xinjie/Omron
* Touch screen Kunlun connectivity
* Electromagnetic valve AIRTAC
* Cylinder AIRTAC

Inquiry Cart 0

Z Shaped Pouch Cell Stacking Machine Lithium Battery Equipment

Coin Cell Assembly Machine

Pouch Cell Assembly Equipment

Cylindrical Cell Assembly Machine

Battery Slurry Mixer

Battery Materials Drying Oven

Battery Coating Machine

Battery Sealing Machine

Electrode Roller Press Equipment

Electrode Slitting Cutting Equipment

Battery Cell Welding Machine

Winding Stacking Equipment

Electrochemical Workstation

Pouch Cell Forming Machine

Electrolyte Filling Injection Equipment

Battery Slurry Viscometer

Vacuum Standing Box

Pouch Cell Cutting Edge Equipment

Coin Cell Crimping Machine

Cylindrical Cell Groove Crimping Equipment

NMP Solvent Treatment System

Battery Laboratory Equipment

Battery Pilot Machine

Electrode Preparation

Prismatic Cell Assembly Machine

Battery Pack Equipment

Battery Production Line

Laboratory Glove Box

Battery Drying Room

Rotary Dehumidifier

Battery Test Equipment

Battery Materials And Accessories

Z Shaped Pouch Cell Stacking Machine Lithium Battery Equipment