Product Introduction:
The stacking process for battery cells, which involves Z-shaped stacking of positive and negative electrodes with separators, is a device that can be applied to the stacking process of lithium-ion battery electrodes. The device adopts an automatic tension control system for isolation membranes, and the cylinder drives the diaphragm to move left and right to achieve Z-shaped stacking. The cantilever design is easy to operate. Compared to manual laminating machines, this equipment has the characteristics of high laminating efficiency, good laminating neatness, and a wide range of applicable battery sizes. It is an ideal choice for research and development sample production and small batch trial production equipment.

Main features:
*The calibration, operation, and maintenance of the machine are simple and easy;
*Suitable for a wide range of cell stack sizes;
*Semi automatic laminating and tension control system;
*Automatic counting and zeroing function;
*The function of automatically maintaining the last used parameter status after power outage and non use;
*The whole machine is suitable for a wide range of battery sizes;
*Using foot pedal switch to control cylinder action;
*The calibration, operation, and maintenance of the machine are simple and easy;
*High work efficiency, equipped with a digital timer;
*Tabletop type, can be placed on a regular desktop, with a delicate and beautiful appearance.

Specification

Lamination viscosity	The uniformity is better than ± 0.5mm
Lamination size (including pole lug length)	Min. L44mm * W44mm (If it is small, it needs to replace the pressing plate) Max. L200mm * W150mm (the pole lug is on the long side)
Laminate thickness	Max.12mm (if thicker, the adjusting plate needs to be replaced)
Diaphragm roll diameter	Max. 220mm
Installation dimensions	L512mmW820mmH580mm
Weight	About 50Kg
Voltage	Voltage single-phase 220VAC ± 10% (110VAC can be customized)
Frequency	50Hz/60Hz
Power	200W
Compressed air	0.4~0.6MPa
Usage environment	Recommended ambient temperature: 25 ± 3 ℃, humidity: 30~90RH, no vibration and electromagnetic interference

Pouch cell asssembly line

Laboratory Pouch Cell Battery Assembly Stacking Machine

Inquiry Cart 0

Laboratory Pouch Cell Battery Assembly Stacking Machine

Coin Cell Assembly Machine

Pouch Cell Assembly Equipment

Cylindrical Cell Assembly Machine

Battery Slurry Mixer

Battery Materials Drying Oven

Battery Coating Machine

Battery Sealing Machine

Electrode Roller Press Equipment

Electrode Slitting Cutting Equipment

Battery Cell Welding Machine

Winding Stacking Equipment

Electrochemical Workstation

Pouch Cell Forming Machine

Electrolyte Filling Injection Equipment

Battery Slurry Viscometer

Vacuum Standing Box

Pouch Cell Cutting Edge Equipment

Coin Cell Crimping Machine

Cylindrical Cell Groove Crimping Equipment

NMP Solvent Treatment System

Battery Laboratory Equipment

Battery Pilot Machine

Electrode Preparation

Prismatic Cell Assembly Machine

Battery Pack Equipment

Battery Production Line

Laboratory Glove Box

Battery Drying Room

Rotary Dehumidifier

Battery Test Equipment

Battery Materials And Accessories

Laboratory Pouch Cell Battery Assembly Stacking Machine