
Add to Cart
Vacuum dry Oven furnance for Battery Eelctrode Reel with four-door cylinder
Number | Item | Technical Parameters | |
1 | Heating Principle | External circulation hot air heating | |
2 | Power Supply | 380V, 50HZ, 12KW | |
3 | Gas Source | Drying gas 0.1-0.2Mpa/vacuum -0.098- -0.1Mpa/compressed gas 0.4-0.5Mpa | |
4 | Temperature | Room temperature to 150℃ | |
5 | Vacuum Degree | When pumped to -0.1--0.098Mpa, digital display for 24H pressure holding rate ≥95% | |
6 | Display Error | Set value and stable display value ≤±0.1℃ | |
7 | Insulation Performance | Outer wall temperature does not exceed 45 degrees (excluding glass doors) | |
8 | Temperature Uniformity | At points within 50mm from the wall: ≤±3.5℃ under vacuum, ≤±2.5℃ under atmospheric pressure | |
9 | Inter-layer Temperature Difference | ≤20℃ (within 100 degrees higher than adjacent layers, only 20 degrees higher than room temperature) | |
10 | Response Speed | Display reaches the set value within 30 minutes, stable temperature of empty core part in 45-60 minutes | |
11 | Vacuum Pumping and Nitrogen Filling Positions and Interface Specifications | Interface position at the rear of the equipment; vacuum pumping interface is DN20, dry gas filling interface is ¢12mm gas pipe interface | |
12 | Chamber Size | 600 diameter × 700 depth × 4 | |
13 | Overall Dimensions | 1900 height × 2230 width × 1250 depth |